Slide the handlebar post onto the main frame housing. Be careful not to pinch the internal wiring.

Increases or decreases resistance levels and adjusts target program values.

To ensure your Body Sculpture BC-5700 stays in top condition, perform the following maintenance:

It uses a magnetic brake system, which ensures a smooth and ultra-quiet ride, ideal for home use without distracting noise. Intensity Levels:

A durable frame ensures safety during intense workouts.

The digital monitor on the Body Sculpture BC 5700 is your central hub for tracking performance. Depending on your exact model version, the console features an intuitive LCD interface driven by target buttons (). Core Data Readouts

If the bike begins to squeak, it is rarely the internal magnets. Check the and stabilizer bolts . Over time, these can loosen. A quick tighten with the provided spanner usually solves the issue. Inaccurate Heart Rate If the pulse reading is erratic: Ensure your palms are fully covering the silver sensors. Moisten your hands slightly to improve conductivity.

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | Dead batteries / Loose connection | 1. Replace batteries (2x AA). 2. Check the wire connection under the computer. | | Heart rate not reading | Dry hands / Poor contact | Moisturize palms slightly. Ensure you are holding the metal plates on both hands. | | Squeaking noise | Loose parts / Friction | Check all bolts. Tighten the crank bolts. Apply grease to the seat post if it squeaks. | | Resistance not changing | Knob loose / Internal mechanism | Ensure the tension knob is engaging. If it spins freely without resistance change, the internal cable may have slipped (requires professional repair). | | Bike wobbles | Uneven floor | Adjust the leveling caps on the bottom of the rear stabilizers. |

Feed the wires through the top and plug them into the rear of the LCD console.

The is a "set it and forget it" piece of equipment. By performing a monthly bolt check and keeping the console batteries fresh, this magnetic bike will provide years of reliable service.

Thread the adjustable rubber foot straps onto the pegs of each pedal. Step 3: Install the Seat Post and Saddle

Slide the handlebar post into the main frame, ensuring you do not pinch the cables. Secure with Allen bolts.

The computer console is designed for easy reading, displaying essential data including time, speed, distance, and estimated calories burned.

Connect both the main data cable and pulse wires into the corresponding ports on the back of the LCD console.