: Once successful, the light will turn blue or the camera will announce it is ready for a QR code scan. Common Issues
Connect the microSD card to your computer using a card reader. Format it to FAT32 with default allocation unit size.
: Tap Firmware Update . If a new version is available, you can download and install it manually.
Once the process is complete, the blue light will blink, and the camera will announce “QR code ready to scan” . 3. Factory Reset mjsxj10cm firmware
While older models (like the MJSXJ02CM) had widely available custom firmware modifications (such as Xiaomi-Yi-Hacks ) to enable Local RTSP streams without the internet, the MJSXJ10CM features tighter cryptographic signing on its official firmware updates.
Scroll down and tap on (or directly Firmware Update ).
: These are often caused by a poor Wi-Fi connection. Try moving the camera closer to the router or using a mobile hotspot to bypass potential router blocks. : Once successful, the light will turn blue
Firmware is the low-level software that controls the camera’s hardware. Keeping your up to date provides:
The Ultimate Guide to MJSXJ10CM Firmware Updates and Troubleshooting
A solid orange light that won't turn blue usually indicates a firmware system error. If a standard reset doesn't work, you may need to perform a manual flash. 3. "Device Offline" After Update : Tap Firmware Update
Power cycle the camera by unplugging the type-C power cable, waiting 10 seconds, and plugging it back in. 3. The Camera is Brick after Update (Solid Orange Light)
A quick look at the camera’s hardware specifications clarifies why firmware updates can bring meaningful improvements to its performance: