: Turn the right-hand knob (usually blue) for cold and the left-hand knob (usually red) for hot. Shower Head Settings
: Ensure your vehicle’s water pump is switched on at the main control panel and that there is sufficient water in your onboard tank or external supply. Activate the Water Heater
Decide if the valve will sit horizontally or vertically. Ensure the hot feed aligns with the designated hot inlet side of the valve (traditionally on the left for horizontal configurations). 2. Mounting the Valve caraflo v200 shower instructions
If the temperature becomes inconsistent, you may need to replace the thermostatic cartridge (92mm length, 31.45mm diameter) which is held in place by a screw-in thread. Installation Specifications Caraflo V200 Shower Mixer Tap Thermostatic Chrome
If the mixer begins to leak or was removed for winter, you may need to replace the O-ring seals. eBay Australia Drain Down : Turn off the water supply and drain the system. : Cover the shower drain to avoid losing small parts. : Turn the right-hand knob (usually blue) for
If the water temperature does not match the factory-preset indicators on the knob dial, the internal thermostatic cartridge must be re-calibrated.
If your lever feels stiff, do not force it. Run warm water for 30 seconds first to expand the internal seals. Ensure the hot feed aligns with the designated
| Problem | Likely cause | Solution | |--------|--------------|----------| | Fluctuating temperature | Clogged filters or pressure change | Clean inlet filters on valve body | | Shower won’t reach hot temp | Thermostatic cartridge stuck | Calibrate or replace cartridge | | Diverter not switching | Rubber seals worn | Replace diverter assembly | | Flow rate low | Debris in shower head or hoses | Descale or clean outlets |