Vu — Solo2 Backup Image

Insert your FAT32 USB drive into the front or rear USB port. Press the button on your remote control. Navigate to Setup > Backup Suite > Full Backup .

Connect the USB drive containing the backup to your computer.

Download the vusolo2 backup image (usually a .zip file) and extract it to the root of your USB stick. vu solo2 backup image

Format it to FAT32 filesystem. A 4GB to 16GB drive is ideal.

: Once finished, the front panel will display "Finished... Rebooting" . The receiver will automatically restart into your fully restored, personalized configuration. Troubleshooting Common Backup & Restore Issues The Receiver Ignores the USB and Boots Normally Insert your FAT32 USB drive into the front or rear USB port

The Ultimate Guide to Creating and Restoring a VU+ Solo2 Backup Image

Check the folder structure. The files must sit precisely inside [Drive Letter]:\vuplus\solo2\ . If the folder names are wrong, the receiver ignores them. Connect the USB drive containing the backup to your computer

: Plug the USB drive into either the front panel USB port (hidden behind the right-side flap) or one of the rear USB ports. Power Up : Turn the rear power switch back on.

Instead of setting up everything from scratch after a crash or on a new box, you can flash a backup image to restore the system to an exact working state.