Verify that your weekday settings match (e.g., if ON is set for weekdays, OFF must also be set for weekdays).
The timer must be set to your local time before any programmed schedules will execute correctly.
Press both WEEK and HOUR simultaneously again until the icon disappears. 7. Troubleshooting and Maintenance Potential Cause Verified Solution Blank LCD Screen Internal battery is dead.
Press the WEEK and HOUR buttons simultaneously (or press the dedicated RANDOM button if your specific variant features one). A R or RANDOM icon will appear on the display. chevron digital timer ew-32 user manual
Check if mode is turned on. Look for an "R" or "RANDOM" indicator on the screen and disable it.
You must set the current day and time so the scheduled programs run correctly:
Review your programs to ensure the and PM indicators are correct for both ON and OFF cycles. Verify that your weekday settings match (e
Alarm behavior and battery saving
While holding , press the WEEK button repeatedly until the correct day of the week appears at the top of the display (e.g., MO, TU, WE).
Locate the small, round MASTER CLEAR button on the face of the device. Use a paperclip, pen tip, or toothpick to press it. This clears all previous internal data and readies the screen for initialization. 3. Setting the Current Time and Day A R or RANDOM icon will appear on the display
Overrides or recovers a programmed schedule.
This feature randomizes your programmed on/off times by a margin of 10 to 30 minutes. This creates a realistic "lived-in" look while you are away from home.
While holding , press the HOUR button to cycle through hours. Note the AM/PM indicator on the screen to ensure correct noon/midnight alignment.
: Press the CLOCK and TIMER (or MIN and SEC depending on specific layout) buttons simultaneously to toggle.
Using countdown timer