Before starting, ensure you have the latest version of the software. It can generally be obtained through HDL authorized distributors or the HDL Automation website.
Now you must link user interfaces (like wall keypads or motion sensors) to control those scenes or channels.
: Open the HDL BusPro setup tool. The interface should guide you through the configuration process.
Before programming an HDL Buspro network, you must properly install the software and configure your computer's network interface. Software Download and OS Requirements Windows 7, 10, or 11 (32-bit or 64-bit). hdl buspro setup tool 2
+-----------------+ Ethernet +-------------------+ 4-Core Cable +------------------+ | Programming | -------------------> | HDL IP Gateway | -----------------------> | Buspro Modules | | PC (Tool 2) | | (e.g., MBUS01IP) | | (Dimmers, Relays)| +-----------------+ +-------------------+ +------------------+ IP Address Configuration
Open your Wall Panel or Sensor configuration window in Setup Tool 2. Select the button or logic block you want to program.
Select a button and choose its (e.g., Single On/Off , Combination On , Momentary , or Dimmer ). Look at the Target list for that button. Click Edit . Before starting, ensure you have the latest version
: If you don't know the IP address of your module, use the software's network device search function. Click the "Advanced search" icon, then select "Search network device." In the resulting window, click "Search." If the module doesn't appear immediately, wait 10 seconds and try again.
Cons
Isolate modules by disconnecting bus loops. Search segments individually using the tool. Settings do not persist : Open the HDL BusPro setup tool
Warning: Projects saved in V2 are not backwards compatible with V1. Always export a plain-text logic report if you need to downgrade.
Click . The software will populate a list of all live, connected modules in the left-hand directory tree. Step 2: Modifying Device Properties
The Setup Tool 2 serves as the bridge between the physical hardware (switches, sensors, actuators) and the user's desired automation logic. It is an all-in-one platform for setting device addresses, programming functionalities, updating firmware, and diagnostics. Core Features and Capabilities