We will use a popular pre-built Xray container, such as ghcr.io/xtls/xray-core . 1. Set Up Container Configs
Better: Use a with address-list scripts. There are community scripts that automatically fetch GFW domain lists and create routing marks.
This comprehensive guide covers the architecture, prerequisites, and step-by-step implementation methods for running V2Ray on MikroTik hardware. Understanding V2Ray and MikroTik Integration
: Running a lightweight V2Ray/Xray client inside an official MikroTik Docker-like container. This requires an ARM, ARM64, or x86 router with sufficient RAM and storage.
: Modify your firewall rules to ensure that V2Ray traffic is not blocked. Typically, you'll want to allow the traffic to your V2Ray server. v2ray mikrotik
: Use /ip/firewall/mangle rules to "mark" traffic you want to send through the V2Ray tunnel and use a custom routing table to send that traffic to the container's IP. 4. Community Resources
Setting Up V2Ray on MikroTik RouterOS Integrating allows you to route your entire network traffic through a secure, obfuscated proxy tunnel directly at the router level. This setup eliminates the need to configure V2Ray clients on individual devices like smartphones, laptops, and smart TVs.
Only works for HTTP/HTTPS. No UDP, no non-web traffic.
You need a working VMess/VLESS config from your provider. We will use a popular pre-built Xray container, such as ghcr
Upload this config.json file to the root directory of your MikroTik's flash storage using WinBox Files or an SFTP client. Step 4: Create and Start the V2Ray Container
: She set up the Veth interfaces, tagging the traffic. She wrote a specific firewall rule: any device connected to the "Freedom" SSID would have its traffic quietly handed off to the V2Ray container.
: Once installed, you'll need to configure V2Ray with your server's details. This involves editing the JSON configuration file, specifying your server's address, port, protocol, and other settings.
The most effective way to deploy V2Ray on MikroTik is by leveraging the feature introduced in RouterOS v7. Requirements There are community scripts that automatically fetch GFW
Modern MikroTik routers running RouterOS v7 on ARM, ARM64, or x86 architectures support Docker-compatible containers. This allows you to run a lightweight V2Ray container directly inside the router's resources.
/interface/veth/add name=veth_v2ray address=172.16.10.2/24 gateway=172.16.10.1 Use code with caution. 2. Create a Bridge for the Container
Once the container is downloaded, you must mount your config.json file into the container. This requires creating a directory on the router's file system and mounting it to /etc/v2ray/ inside the container.
Direct the marked traffic explicitly to your V2Ray proxy device.
Then inside the container, ensure date is correct.
: Check your MikroTik system logs. This usually means the config.json file is missing, placed in the wrong directory, or contains invalid syntax/brackets.