How To Update Vgate Maxiscan Vs890 Site

: The update tool is compatible with Windows (XP, Vista, 7, 8, 10).

You must fall back to a dedicated or configure a clean hypervisor environment. Blank Screen / Bootloop

In the software, click the or "Browse" button to select the latest firmware file (usually with a .bin extension). Click the "Update" or "Burn" button.

While continuing to hold the key, plug the Mini-USB cable into the device and connect the opposite end to an active USB port on your PC.

Locate the button (or the designated update key combination specified in your manual) on the VS890 keypad. Press and hold down the HELP button. how to update vgate maxiscan vs890

Before connecting your scanner, you must install the software that communicates with the device.

Navigate to the folder where you saved the latest firmware file, select it, and click .

Once the progress bar reaches 100%, the software will display a "Success" or "Update Completed" notification.

For users who truly need ongoing firmware updates to support newer vehicles and evolving OBD2 protocols, Vgate’s other product lines – such as the vLinker MC+ or iCar Pro 2S – offer the update‑friendly experience that the VS890 unfortunately does not provide. : The update tool is compatible with Windows

: It is recommended to check for new firmware every 3–6 months to ensure support for newer vehicle models. Battery Level

Turn off the scanner, unplug it, and redo the "Hold Button" step to put it back into Update Mode.

Click the or "Burn" button to start flashing the code reader.

This comprehensive guide provides step-by-step instructions on how to successfully update your Vgate Maxiscan VS890 scanner using a Windows PC. Prerequisites Before Updating Click the "Update" or "Burn" button

Do not disconnect the USB cable, close the program, or power off your computer during this process. Doing so can permanently "brick" your scanner.

The VS890 relies on its internal memory or SD card to boot.

Ensure the VS890 scanner is powered off and disconnected from any power source.

Wait until the software displays a or "Finish" dialogue box. The scanner will typically reboot automatically once the process concludes. Step 5: Verify the Firmware Version