Samsung Kg Lock Remove Easy Jtag ((full)) ⭐

Use a hot air station to safely desolder the eMMC/UFS chip from the PCB. Clean the chip pads using a soldering iron, wick, and flux.

Option B: Changing Device Identity (Changing Serial Number/IMEI)

For modern UFS-based Samsung phones, the KG lock is often tied to the RPMB (Replay Protected Memory Block) In the Easy JTAG Plus software, navigate to the If supported, you may need to Clean RPMB or write a specific "KG-Off" file to the RPMB area. 5. Finalization and Booting Disconnect the JTAG hardware and reassemble the phone. Recovery Mode and perform a Wipe Data / Factory Reset Boot the phone. Do samsung kg lock remove easy jtag

Set the voltage appropriate for your connection (typically 1.8V or 2.8V/3.3V depending on the setup). Click .

Always verify local legal guidelines regarding device ownership verification before performing hardware modifications on security locks. Use a hot air station to safely desolder

Warning: This process involves hardware disassembly and partition modification, which voids warranties and carries risks of device "bricking".

: Before any modification, technicians perform a full dump/backup of the device's security partitions (like EFS) to prevent IMEI loss or bricking. Do Set the voltage appropriate for your connection

Connect the soldered wires to the EasyJTAG ISP socket and connect the box to your PC via USB. Open EasyJTAG Plus Software . Select the eMMC or UFS tab, depending on your device.

The KG lock is a security feature that prevents unauthorized use or modification of Samsung devices. It typically has several states: Full restrictions; the device is unusable.

Samsung KG Lock Removal: A Step-by-Step Guide Using Easy-Jtag Plus